Access Oracle Ilom On The Server Module Sp (Web Interface); Power On The Server Module Host - Sun Oracle Netra SPARC T3-1B Getting Started Manual

▼ Access Oracle ILOM on the Server Module SP (Web Interface)

This procedure is for method 1, which uses a web interface through the CMM to access the server module Oracle
ILOM CLI. You must know the CMM IP address to perform this procedure. This procedure also assumes you
have a DHCP environment. For other environments, see instructions in the SPARC T3-1B Server Module
Installation Guide.
1. Ensure that the CMM NET MGT port is connected and configured to communicate on your network.
Refer to the Sun Blade 6000 modular system documentation for details.
2. In a browser on the same network as the modular system, enter the IP address of the CMM.
For example, if your CMM has the IP address 129.99.99.99, direct your browser to that address. A login
window for Oracle ILOM will appear.
3. Log in to Oracle ILOM on the CMM by typing your user name and password.
The factory default Oracle ILOM root password is changeme.
You are now logged in to the CMM Oracle ILOM web interface.
4. Navigate to the server module SP.
a. Select the chassis view for the modular system.
b. Click on the image of the server module that you have installed in the modular system.
The slots in the modular system are numbered from 0 to 9.
5. Start the Remote Console.
a. Select Remote Control on the top menu.
b. Select the Redirection tab.
c. Click on Use serial redirection.
d. Click on Launch Remote Console.
6. Power on the server module.
a. Select the Remote Power Control tab.
b. Click on the menu in that tab and select Power On.
c. Select Save.
d. Select OK when you see this prompt: Are you sure you want to perform a Power On of the server.
The server module host is powered on for the first time. The server module hardware installation is complete
and the server module is ready to be configured to suit your needs. For details on the Oracle Solaris OS
configuration process, see the Netra SPARC T3-1B Installation Guide and the installation guides for your
version of Oracle Solaris OS.

▼ Power On the Server Module Host

If you used a command line method to access the server module SP, rather than use the procedure in
Oracle ILOM on the Server Module SP (Web Interface)"
module host.
, you need to use this procedure to power on the server
"Access
4