Table of Contents
Advertisement
Phone Configuration
User Name:
Display Name:
Codec:
DTMF:
Proxy and Registrar
Proxy / Registrar Info:
Port No.:
Domain Info:
Auth User Name:
Auth Password:
Expire:
Qvalue:
V100LS User Guide
30
Your MyNetFone VoIP number.
What the called party sees when you call them. This can be used
as a way to hide your VoIP number.
The codec used to convert analogue voice to a digital stream.
Default: G.729.
Default: In-band.
The IP address of the SIP server on the Internet. The proxy server
is responsible for forwarding requests received from the V100
ATA to your VoIP service provider. Default: sip.myfone.com.au.
The port on the SIP server that receives requests from the V100
ATA. Default: 5060.
The registrar that saves information of where a party can be
found. Default: sip.myfone.com.au.
The authentication username assigned by MyNetFone. This can
be different to your VoIP number.
The authentication password assigned by MyNetFone.
The maximum time allowed to successfully register with
MyNetFone's service. Default: 60.
The priority assigned to the V100 ATA to register with
MyNetFone's service. The value must be between 0 and 1 with 1
having the highest priority. Default: 0.8.
YML739Rev1
www.netcomm.com.au
Advertisement
Table of Contents
