Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NetComm NP204
Summary of Contents for NetComm NP204
- Page 1 Connecting NP204 with NP202Wn (NP204, NP202Wn)
- Page 2 Connecting NP204 with NP202Wn 1. Connect only the NP204 pair to the computer (one to the computer and another to your modem/router or devices which you require to access). Install the utility software. 2. Make sure to select the Network Card to your computer's ethernet port network card, in the example below “Broadcom NetLink ™...
- Page 3 Please make a note of the Network name which by default is “PrivateNetworkName”...
- Page 4 Unplug the NP204 from the power and connect only the NP202Wn directly to the computer (for best/easy result use second computer. This is because the NP202Wn and NP204 utilities cannot co-exist on the same computer.). Install the NP202Wn utility software and make a note of the default network name which is “HomePlugAV”...
- Page 5 Change the network name to “PrivateNetworkName” and press Apply. With “Simple Connect” as the selected action press the “Simulate Push Button” button.
- Page 6 Private Network name. The network name of either units (NP202Wn or NP204) can be changed as explained above. 8. Now plug the entire power line units (both the NP204 and NP202Wn units) to the power supply. 9. Connect the NP204 to the computer with the NP204 utility software and the NP202Wn to the computer with the NP202Wn utility software.
- Page 7 entire home plug network have same Network name “PrivateNetworkName”. The connection light should be lit on the entire units indicating all can detect each other and work together.
Need help?
Do you have a question about the NP204 and is the answer not in the manual?
Questions and answers