DHCP:
Fixed IP:
IP Address:
Subnet Mask:
Default Gateway:
DNS 1:
DNS 2:
Once making any changes to the settings click the Apply button.
V100LS User Guide
28
Specifies that the V100 ATA must request its TCP/IP address
details from a DHCP service running on your network. This
service is usually available on your ADSL modem / router.
Allows you to specify the addressing details of the V100 ATA on
your network:
The unique address of the V100 ATA on your network.
The subnet mask of your network.
The gateway's address through which the V100 ATA
communicates with the Internet. This is usually your modem /
router.
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router.
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router. DNS 2 can be a different address to DNS 1 to provide a
backup DNS server if DNS 1 fails.
YML739Rev1
www.netcomm.com.au