Table of Contents
Advertisement
Back Panel
NUMBER
NOTE:
This will not erase your MyNetFone username and password and the SIP server
the ATA communicates with.
NOTE:
Telstra and Optus Cable users must connect a DHCP enabled Router or Switch.
Resetting the V100LS ATA to its factory default settings:
Ensure that your V100LS ATA is powered on, indicated by the PWR indicator light.
Use a paper clip or a pencil tip to depress the reset button for at lest 5 seconds and then
release the button.
At this point, the WAN indicator light will begin flashing. The reset process is now in
progress.
When the WAN and POWER lights remain on and do not flash, it means that the reset
process is completed. The default settings are now restored.
YML739Rev1
www.netcomm.com.au
LABEL
Phone
Power
Reset
WAN
DESCRIPTION
Telephone jack (RJ-11) for connecting to an
ordinary phone set. Please see list of
compatible telephones in section...
For connecting to the power adapter that
comes with the package.
To reset your ATA to its factory default
settings. (All customized settings that you
have saved will be lost!)
10/100 Base-T Ethernet Jack (RJ-45) for
connecting to your Broadband Modem,
Router or Switch card.
V100LS User Guide
9
Advertisement
Table of Contents
