Table of Contents
Advertisement
Installing the V100LS ATA
This section covers the installation of the V100LS ATA on your network. The default configuration
of the V100LS ATA allows the device to be installed on your network quickly and easily. Your
MyNetFone username and password are already pre-configured into the device, and it is set to be a
DHCP client allowing it to gather its necessary TCP/IP address details from your modem / router on
your network.
Note:
Your modem / router must have a DHCP server running. Please consult the
manual for your modem / router to find out how to enable this if it is not running
else you can login to the V100LS ATA's web interface to manually configure the
device's TCP/IP details. The default IP address of the V100LS ATA is
192.168.1.100. When prompted, the username is admin and the password is
admin. For advanced configuration of the V100LS ATA you can download the full
V100LS ATA User Guide from NetComm's website at http://
www.netcomm.com.au.
Before continuing...
This assumes that your modem / router has a DHCP server running. If DHCP is not running, you
will need to run the Utility provided on the CD-ROM (detailed in Appendix C) to use your
V100LS.
The default IP address of the V100LS ATA is 192.168.1.100.
Please ensure you have the following checklist completed before connecting the V100LS ATA to
your network:
A spare Ethernet port on the router or switch attached to your modem.
A working broadband Internet connection. Consult an ISP if you do not have a broadband
connection.
A DHCP compatible router or switch is required if you wish to use the internet at the same
time.
Analogue telephone (e.g. Telstra phone or a DECT (cordless telephone) base station) to be
connected to the telephone (RJ11) port on the V100.
A microfilter is required if you have an ADSL connection and wish to connect another
telephone or facsimile directly to the line.
Note:
If you wish to use the caller ID feature, you will need a telephone with an LCD
screen.
Once you have the above checklist completed, you can open the section that relates to your
broadband Internet connection type to commence the setup of the V100LS ATA on your network:
Option A - Ethernet ADSL Internet connection
Option B - Cable Internet connection
V100LS User Guide
10
YML739Rev1
www.netcomm.com.au
Advertisement
Table of Contents
