Page 1
Description The Atmel® STK®600-RC064SAM-72 (STK600-RC72) is a routing card to support the 64-pin version of the Atmel SAM D20 ARM® Cortex™-M0+ based microcontroller on STK600. The STK600 does not support programming of the SAM D20. However, it does work as a breakout board for IO-pins and programming interface, as well as being able to power the device and provide clock signals.
Once the card stack is assembled, the STK600 can be powered. The status LED should be steady green. If it is blinking orange, it might be necessary to let Atmel Studio update the card stack information on the STK600. This is done automatically when connecting to STK600 in the programming dialog.
Page 4
Figure 1-2. Tool Pinout It is necessary to use single wires to connect the SAM-ICE to the STK600 headers. The picture below is a reference for making the connections. Figure 1-3. Connecting SAM-ICE over SWD STK600-RC064SAM-72 [USER GUIDE] 42148A-MCU-06/2013...
Document Revision History Doc. Rev. Date Comment 06/2013 First release STK600-RC064SAM-72 [USER GUIDE] 42148A-MCU-06/2013...
Page 6
Corporation or its subsidiaries. ARM® and Cortex® are registered trademarks of ARM Ltd. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products.
Need help?
Do you have a question about the STK600-RC064SAM-72 and is the answer not in the manual?
Questions and answers