Specifications - Control 4 C4-TW7C0-BL Installation Manual

7" In-Wall Touch Screen
with Camera
Installation Guide
Accessories
PoE. Control4 Power over Ethernet Injector, sold
•
separately (AC-POE1-B).
• Back Box Options. There are four (4) back
box options available for this Touch Screen's
installation. Metal and plastic back boxes
are available for new construction or retrofit
installations.
5" and 7" In-Wall Touch Screen Back Box Kits -
New Construction
- 5" and 7" In-Wall Touch Screens Wall Box,
New Construction, Plastic (C4-NWB57C-P)
- 5" and 7" In-Wall Touch Screens Wall Box,
New Construction, Metal (C4-NWB57C-M)
5" and 7" In-Wall Touch Screen Back Box Kit -
Retrofit
- 5" and 7" In-Wall Touch Screens Wall Box,
Retrofit, Plastic (C4-RWB57C-P)
- 5" and 7" In-Wall Touch Screens Wall Box,
Retrofit, Metal (C4-RWB57C-M)
See the Control4 5" or 7" In-Wall Touch Screen
Wall Box Installation Guide - New Construction or
5" or 7" In-Wall Touch Screen Wall Box Installation
Guide - Retrofit for back box installation details.

Specifications

Screen
Wireless
2
™
7" 16:9 wide VGA Color LCD Module
Resolution: 800 x 480
Camera: 640 x 480 VGA
Brightness: 350 nits
Built In IEEE802.11 b/g/n Wireless LAN
Integral Antenna (b/g/n supported)
Authentication: WEP, WPA, WPA2
Dimensions 4.88" x 7.2" x .60" (124 mm x 183 mm x
(H x W x D) 15.24 mm)
Weight 1.15 lbs. (.52 kg)
Shipping Weight
1.8 lbs. (.81 kg)
Network WiFi (802.11 b/g/n) wireless access
point (WAP) already configured
to communicate with a Control4
Controller (e.g., HC-800). Wireless-N is
recommended for Video Intercom.
Notes: (1) Intercom usage. 802.11b is not
recommended or supported for Video
Intercom. (2) Wireless-N is recommended
for Video Intercom. Even with Wireless-N,
broadcasting to several devices will
degrade Video Intercom response time and
images. Broadcasting to additional devices
will further degrade performance. See
"Wireless Network Limitations."
Requirements
To install the 7" In-Wall Touch Screen with Camera,
Control4 requires the following:
A Home Controller fully installed and configured
•
with a Control4® system.
Control4 7" Touch Screen custom back box
•
installed (OS 2.2.1 or later). See "Accessories."
If using Ethernet with PoE power:
•
- Ethernet network installed and available that
includes a gateway/router/switch
- Control4 PoE Injector (model #AC-POE1-B)
or another third-party PoE Injector or switch
(certified to UL/ANSI standards).
- Two (2) Ethernet CAT5 cables: (1) one that
runs from the Ethernet gateway/router/switch
to the PoE Injector/switch and (2) one that runs
from the PoE Injector/switch to the Ethernet
connection in the Touch Screen's back box.
If using Ethernet with AC power:
•
- Ethernet network installed and available that
includes a gateway/router/switch
- Access to in-wall AC power (a neutral
connection is required)
- One (1) Ethernet CAT5 cable that runs from
the Ethernet gateway/router/switch to the Touch
Screen
- A 14-gauge electrical wire long enough to pull
between the Touch Screen and the power source
If using wireless with AC power:
•
- Wireless network (WiFi 802.11 b/g/n) installed
and available with a wireless access point (WAP)
- Access to in-wall AC power (a neutral