Advertisement
Specifi cations and requirements
Specifi cations
C4-TT7-1-BL, C4-TT7-1-WH, C4-TT7-1-RD, C4-TT10-BL,
Model Numbers
C4-TT10-WH
Resolution: 1280 × 800, capacitive touch
Screen
Camera: 720p
Ethernet or WiFi (802.11g/n [2.4 GHz])
Security: WEP, WPA/WPA2 PSK, 802.1x EAP, PEAP
Notes: (1) While technically the touch screen can
use 802.11b, 802.11b is not supported. (2) 802.11n
Network
is recommended for best performance. Even
with 802.11n, broadcasting to several devices will
degrade Video Intercom response time and images.
Broadcasting to additional devices will further degrade
performance. See "Wireless Network Limitations."
PoE (IEEE 802.3af) 13W peak; 44~57VDC; 10W @
44VDC = 0.22A
Power supply
100-240VAC, 50/60 Hz
International power supply adapters included
Operating
32 ~ 104˚F (0˚ ~ 40˚C)
temperature
Storage temperature
4 ~ 158˚F (-20˚ ~ 70˚C)
Charging station
RJ-45 (PoE, Ethernet)
5VDC power
connections
7" Touch screen: 7.0 × 5.1 × 0.75" (178 × 130 × 19 mm)
7" Charging station: 4.17 × 3.11 × 2.21"
(106 × 79 × 56 mm)
Dimensions (W×H×D)
10" touch screen: 9.65 × 6.77 × 0.91"
(245 × 172 × 23 mm)
10" dock: 4.53 × 4.02 × 2.60" (115 × 102 × 66 mm)
7" Touch screen: 0.7 lbs. (0.32 kg)
7" charging station: 0.8 lbs. (0.36 kg)
Weight
10" Touch screen: 1.35 lbs. (0.60 kg)
10" charging station: 1.05 lbs. (0.46 kg)
Requirements
• A controller fully installed and confi gured with Control4
OS 2.7.2 or later. For the 10" model, Control4 OS 2.8.0 or
later is recommended.
• If using Ethernet data:
• Ethernet network installed and available that includes a
gateway/router/switch.
• One Ethernet cable that runs from the Ethernet gateway/
router/switch to the touch screen
• If using WiFi data:
• Wireless network (WiFi 802.11b/g/n) installed and
available with a wireless access point (WAP). Security can
be WEP, WPA/WPA2 PSK, 801.1x EAP, PEAP.
• If using PoE power:
• Control4 PoE Injector (model #AC-POE1-B) or another
third-party PoE Injector or switch (UL/ANSI certifi ed).
• Two unshielded Ethernet CAT5/6 cables: (1) one that
runs from the Ethernet gateway/router/switch to the
PoE Injector/switch and (2) one that runs from the PoE
injector/switch to the Ethernet connection in the touch
screen's wall box.
• If using AC power:
• Access to AC power outlet (AC power adapter included)
• Wireless network (WiFi 802.11b/g/n) installed and
available with a wireless access point (WAP). Security can
be WEP, WPA/WPA2 PSK, 801.1x EAP, PEAP.
• Access to AC power outlet (AC power adapter included)
2
Views
Front
A
A Camera LED
B Camera
C 7" diagonal, capacitive 1280 × 800 display
Back
A
B
E
G
A Power button. Press and release to toggle screen on/off, press
and hold to reboot (if attached to charging station) or turn off
(if detached from charging station)
B Reset button (recessed). Use a straightened paper clip to
press and release to reboot (if attached to charging station) or
turn off (if detached from charging station)
C Docking connector
D Screw hole for permanently mounting charging station
E Volume buttons
F Stereo speakers
G Microphone
B
C
C
D
F
Advertisement
