Regulating The Flame; Switching Off - Miele KM 2012 Operating Instructions Manual

In the event of a power cut

Regulating the flame

Switching off

If there is an interruption to the electricity supply the gas can
be ignited with a match.
^ Press in the relevant control and turn it anti-clockwise to the
large gas symbol.
^ Hold the control pressed in and light the gas at the burner
with a match.
^ Keep the control pressed in for a further 8-10 seconds and
then release it.
The burners can be regulated at any level between the
strongest and weakest flame.
Control the flame so that it does not spread out beyond the
sides of the pan. As the outer part of the flame is much hotter
than the centre, the tips of the flames should stay beneath the
pan base. Flame tips which extend beyond the sides of the
pan merely warm up the air in the room and can also damage
pan handles and increase the danger of injury.
^ Turn the control clockwise to position "ß" .
This stops the flow of gas and the flame goes out.
Operation
17