Adjusting The Flame; Switching Off - Miele ProLine CS 1012-2 Operating And Installation Instructions

Table of Contents

Advertisement

Operation

Adjusting the flame

The burners can be variably adjusted
between the lowest and highest flame
settings.
Because the edges of the flame are
much hotter than its center, the flame
tips should stay beneath the bottom of
the cookware. Flame tips which ex-
tend beyond the sides of the cook-
ware emit unnecessary heat into the
room and can also damage cookware
handles, which increases the risk of
injury.
 Adjust the flame so that it never ex-
tends up the sides of the cookware.
24
Visual features of gas flames

Switching off

 Turn the control knob clockwise to
the  position.
This stops the flow of gas and the flame
goes out.
Yellow flames
Call Customer
Service.
Yellow tips on
the outer cone
Normal for LP gas
Pale blue flames
possibly with yel-
low tips on the in-
ner cone
Normal for natural
gas

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proline cs 1012-2 lpProline cs 1012-2 g

Table of Contents