Chapter 2 BASIC OPERATION
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying,
are as follows.
Making copies
1
Press the [COPY] button on the control panel.
2
Place the original(s).
& P.16 "Placing originals" in this manual
3
Select the copy modes as required.
4
1
Key in the desired number of copies, and then
control panel. Copying starts.
20
2
press the [START] button on the
• To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
• Printed paper exits to the exit tray of the equipment or
the Finisher (optional). The tray to which the paper exits
is indicated by the arrow on the touch panel.