Chapter Basic Operation; Basic Copying Operation - Toshiba E studio 2010C Quick Start Manual

Chapter  BASIC OPERATION

Basic Copying Operation

The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Making copies
1 1
Press the [COPY] button on the control panel.
2 2
Place the original(s).
& P.16 "Placing originals" in this manual
3 3
Select the copy modes as required.
4 4
1
Key in the desired number of copies, and then
control panel. Copying starts.
0
You can switch the color mode. There are 3 color modes as
shown below.
FULL COLOR: All originals are copied in full color. (Default)
BLACK:
AUTO COLOR: The equipment automatically judges the
2
• To stop copying, press the [STOP] button on the control
1
panel and then [MEMORY CLEAR] on the touch panel.
• Printed paper exits to the exit tray of the equipment or the
receiving tray of the Finisher. The tray to which the paper
exits is indicated by the arrow on the touch panel.
2
All originals are copied in black and white.
type of each color on originals. Colored
originals are copied in full color and black-
and-white originals are copied in black and
white.
press the [START] button on the