Chapter 2 BASIC OPERATION
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying,
are as follows.
Making copies
1
Press the [COPY] button on the control panel.
2
Place the original(s).
& P.16 "Placing originals" in this manual
3
Select the copy modes as required.
4
1
Key in the desired number of copies, and then
control panel. Copying starts.
20
You can switch the color mode. There are 3 color
modes as shown below.
FULL COLOR: All originals are copied in full color.
(Default)
BLACK:
All originals are copied in black and
white.
AUTO COLOR: The equipment automatically judges
the type of each color on originals.
Colored originals are copied in full color
and black-and-white originals are
copied in black and white.
2
press the [START] button on the
• To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
• Printed paper exits to the exit tray of the equipment or
the Finisher (optional). The tray to which the paper exits
is indicated by the arrow on the touch panel.