Introduction; Firmware Compatibility; Fire Alarm And Repeater Panels - Ziton ZP2-F Series Operation Manual

Introduction

This is the operation manual for the ZP2-F Series Fire Alarm Control Panels.
Read these instructions and all related documentation entirely before operating
this product.

Firmware compatibility

Information in this document covers control panels with firmware version 2.0 or
later. This document must not be used as a guide to operation of control panels
with an earlier firmware version.
To check the firmware version of your control panel, see the Revision report in
the Reports menu. For more information, see "Viewing reports" on page 20.

Fire alarm and repeater panels

The series includes the control panels shown below.
Table 1: Fire alarm and repeater panels
Model Cabinet size
ZP2-F1 Large
ZP2-F1-S Small
ZP2-F1-FB Large
ZP2-F1-FB-S Small
ZP2-F1-SC Large
ZP2-F1-SC-S Small
ZP2-F2 Large
ZP2-F2-S Small
ZP2-F2-FB Large
ZP2-F2-FB-S Small
ZP2-F2-SC Large
ZP2-F2-SC-S Small
ZP2-FR Large
ZP2-FR-S Small
ZP2-FR-FB Large
ZP2-FR-FB-S Small
ZP2-FR-SC Large
ZP2-FR-SC-S Small
[1] Includes a fireman's key
ZP2-F Series Fire Alarm Control Panel Operation Manual
Description
One-loop addressable fire alarm control panel
One-loop addressable fire alarm control panel with fire
routing and fire protection controls
One-loop addressable fire alarm control panel with fire
routing and fire protection controls [1]
Two-loop addressable fire alarm control panel
Two-loop addressable fire alarm control panel with fire
routing and fire protection controls
Two-loop addressable fire alarm control panel with fire
routing and fire protection controls [1]
Addressable fire alarm repeater panel
Addressable fire alarm repeater panel with fire routing and
fire protection controls
Addressable fire alarm repeater panel with fire routing and
fire protection controls [1]
1