Public Level Operation - Ziton ZP2-F Series Operation Manual

Public level operation

Public level operations are those that can be performed by any user. No
password is required to perform tasks at this level.
This user level lets you:
• Silence the buzzer
• Cancel an active sounder, fire routing, or fire protection delay
• View current events
• View support information
Silencing the buzzer
To silence the control panel buzzer, press the Panel Silence button. A steady
Panel Silence LED indicates that the buzzer was silenced.
Note: Depending on the control panel configuration, the buzzer may re-sound for
each new event reported.
Cancelling an active sounder delay
If a sounder delay is enabled and active (counting down), press the Sounder
Delay button to cancel the delay and activate sounders immediately.
A sounder delay is indicated as follows:
• A steady Sounder Delay LED indicates that a delay is enabled
• A flashing Sounder Delay LED during a fire alarm indicates that the
configured delay is active (sounders are activated when the configured delay
elapses or when the delay is cancelled)
A fire alarm activated by a manual call point overrides any configured delay and
activates the sounders immediately.
Cancelling an active fire routing or fire protection delay
If a fire routing or fire protection delay is enabled and active (counting down),
press the corresponding ON/Acknowledged or Delay button to cancel the delay
and activate the feature immediately.
Fire routing and fire protection delay indications are shown in the table below.
Table 6: Fire routing and fire protection delay indications
Delay type Delay indications
Fire routing A steady Fire Routing Delay LED indicates that a delay is enabled.
A flashing Fire Routing Delay LED during a fire alarm indicates that the
configured delay is active (fire routing is activated when the configured delay
elapses or when the delay is cancelled).
Fire protection A steady Fire Protection Delay LED indicates that a delay is enabled.
A flashing Fire Protection Delay LED during a fire alarm indicates that the
configured delay is active (fire protection is activated when the configured
delay elapses or when the delay is cancelled).
16 ZP2-F Series Fire Alarm Control Panel Operation Manual