Operator Level Operation - Ziton ZP2-F Series Operation Manual

Operator level operation

The operator level is protected by password security and is reserved for
authorized users who have been trained to operate the control panel. The default
operator user password is 2222.
This user level lets you:
• Perform all tasks described in "Public level operation" on page 16
• Reset the control panel
• Manually start sounders, stop sounders, or restart stopped sounders
• Enable or disable previously configured sounder, fire routing, and fire
protection delays
• View system status reports
• Change the operator password
• Perform LED, LCD, buzzer, and keyboard tests
• View the alarm counter
The Main menu
The operator Main menu is shown below.
Figure 4: The operator Main menu
Resetting the control panel
To reset the control panel and clear all current system events, press the Reset
button. System events that have not been resolved will continue to be reported
after reset.
Caution: Investigate all fire alarms and faults before resetting the control panel.
Manually starting sounders
To manually start the sounders when the control panel is not in alarm, press the
Sounder Start/Stop button.
Note: Availability of this feature is subject to previous configuration. Contact your
installation or maintenance contractor to confirm your configuration details.
18 ZP2-F Series Fire Alarm Control Panel Operation Manual