Record And Marking; Record Configuration - New Session - NewTek 3Play User Manual

10 RECORD AND MARKING

We've previously mentioned marking events – timed (or, if you like, 'bookmarked') segments of
your audio video data (see Sections 2.2 and 8.9). Managing and playing clips from events will be
covered in Chapter 12 (The Clips List) and 13 (The Play List).
Live, or previously recorded audio/video data, can be sent to 3Play's outputs when Record is off;
but as event marking is dependent on recording, let's expand on that matter first.
10.1 RECORD CONFIGURATION – NEW SESSION
The first step toward recording is deciding which live inputs will be captured, and on which hard
drives the data from various inputs will be stored. These important decisions are made in the
Startup Screen at the time of first creating a new session.
Figure 94
Note: The Record Configuration options you choose are retained with the session, and cannot be
altered after launching it. To work with a different Record Configuration, create a new session.
Recording audio and video from its inputs, and marking timed
segments of this data for review, instant replay or other purposes
are the core functions of your NewTek 3Play™ system.
This section will explain recording and various approaches to event
marking in fine detail, showing how these important operations can
be performed using control surface, Replay Desktop controls, or
using keyboard shortcuts.
Page | 107