Table of Contents
Advertisement
2. Fasten filter cover with three screws.
Alternator Belt Inspection
Inspecting the belts with the engine running may cause serious
injury or death. Turn off the engine and remove the ignition key
before adjusting tension or inspecting belts.
1. Inspect the alternator belt and have it replaced by an
authorized dealer if any of the following conditions are
found.
a. Cracks or deterioration in the rubber portion of the belt.
b. Belt surfaces rough or uneven.
c. Signs of wear on edges or outer surfaces of belt.
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with PTFE.
Tube
Ref No.
94
95
eng
MAINTENANCE
Description
Anti-Corrosion
Grease
2-4-C with
PTFE
WARNING
!
Where Used
Propeller shaft
Propeller shaft
81
29477
92-802867Q 1
92-802859A 1
Part No.
Advertisement
Table of Contents
