Table of Contents
Advertisement
•
Touch up any paint nicks. See your dealer for touch‑up
paint.
•
Spray Quicksilver or Mercury Precision Lubricants Corrosion
Guard on external metal surfaces (except corrosion control
anodes).
Tube
Description
Ref No.
Corrosion
120
Guard
Gearcase
•
Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).
Positioning Outboard for Storage
Store outboard in an upright (vertical) position to allow water to
drain out of the outboard.
Storing the outboard in a tilted position can damage the
outboard. Water trapped in the cooling passages or rain water
collected in the propeller exhaust outlet in the gearcase can
freeze. Store the outboard in the full down position.
Battery Storage
•
Follow the battery manufacturer's instructions for storage
and recharging.
•
Remove the battery from the boat and check water level.
Recharge if necessary.
•
Store the battery in a cool, dry place.
•
Periodically check the water level and recharge the battery
during storage.
STORAGE
Where Used
External metal surfaces
NOTICE
90
Part No.
92-802878 55
eng
Advertisement
Table of Contents
