Table of Contents
Advertisement
Rotating propellers can cause serious injury or death. Never
operate the boat out of the water with a propeller installed.
Before installing or removing a propeller, place the drive unit in
neutral and engage the lanyard stop switch to prevent the
engine from starting. Place a block of wood between the
propeller blade and the anti‑ventilation plate.
1. Shift the outboard to the neutral ("N") position.
IMPORTANT: Refer to Spark Plug Inspection and Replacement
for removing spark plug leads.
2. Remove the spark plug leads to prevent the engine from
starting.
3. Straighten the bent tabs on the propeller nut retainer.
MAINTENANCE
WARNING
!
N
26838
26899
26900
76
eng
Advertisement
Table of Contents
