Table of Contents
Advertisement
•
Do not use deep cycle batteries. Engines must use a marine
starting battery with 1000 MCA, 800 CCA or 180 Ah.
•
When connecting engine battery, hex nuts must be used to
secure battery leads to battery posts. Torque nuts to
specification.
Description
Hex nuts
Decal needs to be placed on or near battery box for future
service reference. One 5/16 in. and one 3/8 in. hex nut are
supplied per battery for wing nut replacement. Metric hex nuts
are not supplied.
Propellers
REMOVAL
IMPORTANT: Propellers used on this product require the
Mercury Marine Flo‑Torq III type hub or equivalent.
eng
MAINTENANCE
NOTICE - DTS & OptiMax Engines
DO NOT USE DEEP CYCLE BATTERIES!
DTS (Digital Throttle and Shift) applications and
OptiMax engines must use a marine starting
battery with 1000 MCA, 800 CCA, or 180 Ah. rating.
IMPORTANT:
Battery cable size and length is critical. Refer to
engine installation manual for size requirements.
Place decal on or near battery box for future service
reference. 5/16" and 3/8" hex nuts supplied for wing
nut replacement. Metric hex nuts not supplied.
Nm
13.5
13.5Nm (120 lbs. in.)
DO NOT
USE WING
NUTS
37-895387
75
lb. in.
lb. ft.
120
3486
Advertisement
Table of Contents
