Table of Contents
Advertisement
4. Place a block of wood between the gearcase and propeller
and remove the propeller nut.
5. Pull the propeller straight off the shaft. If the propeller is
seized to the shaft and cannot be removed, have the
propeller removed by an authorized dealer.
INSTALLATION
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in saltwater), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals and also each
time the propeller is removed.
1. Coat the propeller shaft with Quicksilver or Mercury
Precision Lubricants Anti‑Corrosion Grease or 2‑4‑C with
PTFE.
Tube
Ref No.
94
eng
MAINTENANCE
Description
Anti-Corrosion
Grease
26901
26902
Where Used
Propeller shaft
77
Part No.
92-802867Q 1
Advertisement
Table of Contents
