Alternator Belt Inspection; Lubrication Points - Mercury 135 OptiMax Manual

2. Snap out the retainer and remove filter.
a - Retainer
INSTALLATION
1. Install filter into cover.
2. Secure filter into cover with retainer.

Alternator Belt Inspection

1. Inspect the alternator belt and have it replaced by an authorized dealer if any of the following
conditions are found.
a. Cracks or deterioration in the rubber portion of the belt.
b. Belt surfaces rough or uneven.
c. Signs of wear on edges or outer surfaces of belt.

Lubrication Points

1. Lubricate the following with Quicksilver or Mercury Precision Special Lubricant 101.
Tube Ref No.
Special Lubricant 101
34
MAINTENANCE
Description
a
b
29397
b - Filter
29398
Where Used
Trim rod ball ends
44
Part No.
92-802865Q02