Ac.g. Flywheel Installation - Sym GTS 250 Service Manual

To this chapter contents
10. Alternator / Starting Clutch

AC.G. Flywheel Installation

Starting driven gear
Install starting driven gear onto one way clutch.
Align the key on crankshaft with the flywheel Groove
groove, and then install the flywheel.
Hold the flywheel by drive face with universal
holder, and tighten flywheel nut.
Torque value: 5.0~6.0kgf-m
Special tool:
Universal Holder SYM-2210100
10-8