Adding Brake Fluid - Sym GTS 250 Service Manual

Adding Brake Fluid

Before the brake fluid reservoir is removed, turn
the handle so that the brake fluid reservoir
becomes horizontal, and then remove the brake
fluid reservoir.
When maintenance brake system, will be
supposed to paint the surface or the rubber parts
catches up by the rags.
Caution
Supplement brake fluid please do not surpass the
upper limit, spilled brake fluid on painted
surfaces, plastic or rubber components may
result in their damages.
Remove the master cylinder cap and diaphragm.
Increases the high quality brake fluid, uses by all
means must with the trade mark brake fluid joins
in the master cylinder.
Clean the dirty brake disk.
Caution
The dirty brake lining or disk will reduce the
brake performance.
To mixed non-compatible brake fluid will
reduce brake performance.
Foreign materials will block the system
causing brake performance to be reduced or
totally lost.
To this chapter contents
Rear brake master cylinder
14. Brake System
Front brake master cylinder
Master cylinder cap
Diaphragm
Upper level
Brake
Fluid
14-5