Sym GTS 250 Service Manual page 189

16. Rear Wheel / Rear Fork / Rear Cushion
Remove rear wheel axle nut.
Remove rear fork and both side collars.
Remove the rear wheel.
Inspection rear wheel rim
Place the wheel rim on a rotational support.
Rotate it by hand and measure the run-out with a
dial indicator.
Run-out limit: 2.0 mm
Installation
Install in reverse order of removal procedures.
Torque Value:
Rear wheel axle nut
Rear cushion under bolt
Rear fork mounting bolt
Brake clipper mounting bolts 2.9~3.5kgf-m
16-4
To this chapter contents
11.0~13.0kgf-m
2.4~3.0kgf-m
4.0~5.0kgf-m
1 nut