Table of Contents
Advertisement
5. The Firmware Upgrade Utility main screen appears. The Utility inspects
your installation. All the devices capable of being upgraded by the
package are listed in the Device List panel.
6. As you select a device in the list, its description appears in the Device
Description panel. After you have made your device selection, Click Next
to perform the upgrade.
If you enabled Check Firmware Version, the Utility compares the device's
firmware level with that of the upgrade files. If the device's version is
higher than the upgrade version, a dialog box gives you the option to
Continue: Yes or No.
If you did not enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status Messages
panel, and the progress toward completion is shown on the Progress bar.
Chapter 7. Firmware Upgrade
75
Advertisement
Table of Contents
