ATEN CM1164 User Manual page 20

CM1164 User Manual
2. Using the screws provided in the Mounting Kit (not included with this
package), screw the mounting bracket into the side of the unit as show in
the diagram below:
Note: The Mounting Kit is not included in the package. Please contact your
dealer for more details.
3. Screw the bracket into any convenient location on the rack.
Note: These screws are not provided. We recommend that you use M5 x 12
Phillips Type I cross, recessed type screws.
10
Phillips hex head Phillips hex head
M3x6 M3x6