ATEN CM1164 User Manual page 41

Hotkey
[Port ID] [U] [Enter]
[Port ID] [S] [Enter]
[Station ID] [Port ID] [K] [Enter]
[D]
[F4]
[F5]
Brings only the USB hub focus from the port
that currently has it to the computer that
corresponds to the Port ID entered. The KVM
and audio focus do not change.
Brings only the audio focus from the port that
currently has it to the computer that corresponds
to the Port ID entered. The KVM and USB hub
focus do not change.
Brings only the KVM focus to the computer that
corresponds to the Port ID entered, on the
CM1164 that corresponds to the Station ID
entered, when a daisy chain is setup. See Daisy
Chaining, page 13.
Implements Video DynaSync to eliminate boot-
up display problems and optimize resolutions
when switching between ports. See Video
DynaSync, page 34.
Lists the KVM's current settings. See Press the
port number [1], [2], [3], or [4] and [Enter].,
page 34.
If any USB devices lose focus or connectivity, a
USB reset my solve the issue. See USB Reset,
page 34.
Chapter 4. Hotkey Operation
Action
31