Dismantling And Rinsing The Cappuccino Frother - Jura IMPRESSA J9.3 One Touch TFT Quick Reference Manual

Dismantling and rinsing
the cappuccino frother
Precondition: 'Please select product:'
T Press the P button.
O
'Maintenance status (1/6)'
T Press the 'Clean the milk system'
'Cleaning agent for milk system'
T Pour 250 ml of fresh water into a receptacle and add one
capful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam ü or Milk z position.
T Place another receptacle under the cappuccino frother.
T Press the 'Next'
'Milk system is being
puccino frother.
'Water for cleaning milk system'
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the cappuc-
cino frother again.
c T Press the Maintenance button.
T Press the 'Next'
'Milk system is being
the pipe are rinsed with fresh water.
'Please select product:'
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
IMPRESSA J9.3 One Touch TFT – Quick Reference Guide
is displayed.
button.
button.
cleaned.', water flows out of the cap-
button.
cleaned.', the cappuccino frother and
appears on the display.
3