Inserting And Activating The Filter - Jura IMPRESSA J9.3 One Touch TFT Quick Reference Manual

IMPRESSA J9.3 One Touch TFT – Quick Reference Guide
Inserting and activating
the filter
4
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge.If the water hardness is 10° dH or more,
we recommend using the filter cartridge.
E If you do not know the hardness of your water, you must find
this out first .
E Perform the 'inserting the filter' operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition:
'Please select product:'
T Press the P button.
O
'Maintenance status (1/6)'
g T Turn the Rotary Switch until the programme item
nance settings (3/6)'
T Press the 'Filter'
'Filter'
T Press the 'Active'
T Press the 'Save'
'Saved' appears briefly on the display.
'Insert filter'.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Press the 'Next'
'Filter is being
frother.
is displayed.
is displayed.
button.
button.
button.
button.
rinsed.', water flows out of the cappuccino
'Mainte-