Available Operations In The [Finish] Tab - Olivetti d-Color MF552 Operations

2.6 Setting items in the printer driver
Settings
[Binding Position]
[Binding Margin]
[Image Shift]
2.6.8

Available operations in the [Finish] tab

In the [Finish] tab, you can configure settings for the finish of printouts.
Settings
[Staple]
[Center Staple and Fold]
[Punch]
[Fold]
[Page Fold Setting]
[Output Tray]
d-Color MF552/452/362/282/222
Description
Select the binding positions for stapling or punching the sheets.
Select this check box to provide a margin on printed sheets.
Click [Binding Margin Settings...] to specify the size of the margin in detail.
• [Shift Mode]: Select how the images are shifted for creating the margin.
• [Front Side]: Specify the size of the margin on the front side.
• [Back Side]: When you print on both sides, specify the size of the mar-
gin on the back side. When the [Same value for Front and Back sides]
check box is selected, a margin of the same size is created on both
front and back sides.
Select this check box to fine tune (shift) the print position of the image with
respect to the paper.
Click [Image Shift Settings...] to specify the print position in detail.
• [Front Side]: Specify the upward/downward and rightward/leftward
shift distances for the front side.
• [Back Side]: When you print on both sides, specify the upward/down-
ward and rightward/leftward shift distances for the back side. Selecting
the [Same value for Front and Back sides] check box applies the same
settings to both sides.
Description
Select this check box to staple the printed sheets. In addition, specify the
number and positions of staples.
Select this check box to staple the printed sheets in two positions in the
center.
Use this option when you have set [Print Type] to [Booklet] in the [Layout]
tab.
Select this check box to make punch holes (binder holes) in the printed
sheets. In addition, specify the number and positions of punch holes.
Select this check box to fold the printed sheets. In addition, select the fold-
ing mode.
When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in
[Fold], specify the number of pages to be folded at one time.
Select the tray to which the printed sheets are output.
2
2-105