Wire The Receivers - KVH Industries TracVision TV1 Installation Manual

9

Wire the Receivers

The steps for connecting the customer's
receiver(s) to the TracVision system and setting
them up depends upon the customer's satellite
TV service (see Figure 19 and Figure 20).
NOTE: KVH's TracVision Configuration Wizard,
available at www.kvh.com/tvseriesconfigurator,
displays a wiring diagram and parts list for all of the
most common configurations.
Follow the steps in the applicable section below
to wire the receivers. Then connect the receiver(s)
to the customer's television(s).
Linear. . . . . . . . . . . . . . . . . . . . . . . . page 14
DIRECTV (SWM) . . . . . . . . . . . . . . page 15
DIRECTV (Non-SWM) . . . . . . . . .
DISH Network/Bell TV
page 17
. . . . . . . . page 18
Figure 19: TV-Hub A Receiver Connections
TV-Hub A
Figure 20: TV-Hub B Receiver Connections
TV-Hub B
Linear Receiver
13