Concentrate Handling And Loading; Loading Concentrate - Cornelius QUEST ELITE 4000 Service Manual

Quest Elite 4000 Service Manual

CONCENTRATE HANDLING AND LOADING

L C
OADING ONCENTRATE
Publication Number: 620048956SER
It is recommended that the concentrate be thawed in a refrigerated 35°F to 40°F
(1.6°C to 4.4°C) compartment for a minimum of 48 hours prior to loading it into the
Quest Juice Dispenser.
!
WARNING:
Concentrate must be completely thawed and within the temperature range of 35°F
to 40°F (1.6°C to 4.4°C) prior to loading. Failing to supply concentrate inside the
recommended temperature range, especially below 35°F (1.6°C), causes an out
of BRIX drink (refer to the BRIXing Procedure section for details).
The Quest Juice Dispenser is designed to use either disposable juice concentrate
containers or the optional Cornelius generic refillable container (sold separately).
Figure 2. Refillable Concentrate Container
1. Thoroughly shake concentrate container prior to use.
2. Place concentrate containers on the dispensing platform shelf inside the
refrigerated cabinet.
3. Engage the concentrate container by pressing it downward into the bottle
adapter opening on the dispensing platform.
NOTE: Be sure to lubricate the o-ring seal on the container nozzle.
This ensures a good seal and allows the pumps to draw
concentrate from the containers more easily. Failure to create
a good seal at this connection may result in weak drinks and/or
seepage of concentrate.
4. Prime each pump by closing the cabinet door and press each dispense
button until concentrate flows from the dispense nozzles.
- 8 - © 2010-2014, Cornelius Inc.