Turn On The Instrument - Keithley 3700A Series Quick Start Manual

Operating the instrument on an incorrect line voltage
may cause damage to the instrument, possibly
voiding the warranty.
To connect line power:
1. Make sure the front-panel power switch is in the off (0) position.
2. Connect the socket of the supplied power cord to the power
connection on the rear panel.
Connect power cord
3. Connect the plug of the power cord to a grounded AC outlet.
Safety Introduction

Turn on the instrument

Turn on the instrument by pressing the front-panel POWER switch
to the on (|) position.
The Series 3700A instrument must be turned on and allowed to
warm up for at least two hours to achieve rated accuracies.
Unpack Connect
Power switch
Test
FAQs
Next steps