Connect The Instrument - Keithley 3700A Series Quick Start Manual

Connect the instrument

To keep users safe, always read and follow all
safety warnings provided with each of the
instruments in your system.
Install and connect a switching card
Unqualified personnel can install a switching card; however, external
connections to the switching module must be performed by qualified
service personnel.
The Series 3700A instruments support the following cards:
Model 3720 Dual 1×30 Multiplexer Card (automatic CJC with
3720-ST accessory)
Model 3721 Dual 1×20 Multiplexer Card (automatic CJC with
3721-ST accessory)
Safety Introduction
Model 3722 Dual 1×48 High Density Multiplexer Card
Model 3723 Dual 1×30 High Speed Reed Relay Multiplexer Card
Model 3724 Dual 1×30 FET Multiplexer Card (60 differential
channels, automatic CJC with 3724-ST accessory)
Model 3730 6×16 High Density Matrix Card
Model 3731 6x16 High Speed Reed Relay Matrix Card
Model 3732 Quad 4×28 Ultra-High Density Reed Relay Matrix
Card
Model 3740 32-Channel Isolated Switch Card
Model 3750 Multifunction Control Card (40 digital I/O bits, 2
analog output channels, and 4 counters)
For a complete list of cards that are available, see www.keithley.com.
Unpack Connect
FAQs
Test
Next steps