Grip Heating - BMW K1300R Manual

Activate the ASC function
4
60
Press and hold down ASC but-
z
ton 1.
ASC symbol no longer
shows; if self-diagnosis has
not completed the ASC warning
light starts flashing.
Release the ASC button within
two seconds.
The ASC symbol remains
off or continues to flash.
The ASC function is activated.
Instead of pressing the ASC
button, you have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 10 km/h after the ignition was
switched off and then on again.

Grip heating

with heated handlebar grips
Operating grip heating
Start the engine.
Grip heating can be activ-
ated only when the en-
gine is running. If the engine is
switched off, grip heating must
be reactivated once the engine is
switched on again.
OE
Press button 1 once.
The current setting is
displayed.
The handlebar grips have two-
stage heating. Stage two is for
heating the grips quickly: it is ad-
visable to switch back to stage