Replacing low-beam and
8
high-beam headlight bulb
The plug arrangement can
120
differ from the illustration,
depending on the bulb to be
replaced.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
z
Remove the covers 1 for the
high-beam headlight or cover 2
for the low-beam headlight by
turning the covers anticlock-
wise.
Disconnect plug 3.
Disengage spring clip 4 from
the latches and swing it up.
Remove bulb 5.
Replace the defective bulb.
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Install bulb 5, making sure that
tab 6 is correctly positioned.