Tyre Pressure Monitoring Rdc; Rdc; Lights - BMW K1300R Manual

Hide thumbs Also See for K1300R:
Table of Contents

Advertisement

The most recently measured
level is displayed for five seconds
when you next switch on the ig-
nition.
The oil sensor might be
defective if the "Check oil
level" message reappears even
though the oil level shown by the
oil tank's level indicator is correct.
In this case, consult your author-
ised BMW Motorrad dealer.
Tyre pressure
monitoring RDC
with tyre pressure monitoring

(RDC)

OE
Viewing tyre-pressure
readings
Switch on the ignition.
Repeatedly press button 1 un-
til the tyre-pressure readings
appear on the display.
The tyre pressures are shown,
accompanied by the wording
RDC P
. The front tyre pres-
sure is on the left; the reading
on the right is the rear tyre pres-
sure. The tyre-pressure readings
are based on a reference tyre
-- --
temperature of 20 °C.
appears directly after the ig-
nition is switched on, because
the sensors do not transmit tyre
pressures until the first time the
motorcycle accelerates to more
than 30 km/h.

Lights

Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
4
55
z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents