Engine Oil - BMW K1300R Manual

6 Adapter
To accommodate the 1/
4" bits and the 9x12 mm
and the 3/8" universal-joint
adapter

Engine oil

Checking engine oil level
OA
without centre stand
Make sure the engine is at op-
erating temperature and hold
the motorcycle upright.
OA
with centre stand
Check that the engine is at op-
erating temperature, make sure
the ground is level and firm
and place the motorcycle on its
centre stand.
Oil can collect in the sump
if the motorcycle is out of
use for an extended period of
time; this oil has to be pumped
into the oil tank before the level
is read. The engine oil must be
at operating temperature to do
this. Checking the oil level with
the engine cold or after no more
than a short ride will lead to mis-
interpretation; this in turn, means
that the engine will be operated
with the incorrect quantity of oil.
In order to ensure that the en-
gine oil level is read correctly,
check the oil level only after a
lengthy trip.
Allow the engine to idle for one
minute.
Switch off the ignition.
Check the oil level in oil-level
indicator 1.
8
101
z