Luggage Loops - BMW K1300R Manual

4
68
Lift the rear of the seat.
The seat can be damaged
z
at the edges if it is placed
on a rough surface.
Lay the seat upholstered side
down on a smooth, clean sur-
face, such as the fuel tank.
Release the key and pull the
seat back out of its holder.
Installing the seat
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
Always make sure that the
motorcycle is stable and firmly
supported.
Slide the seat forwards into the
holders 1, then press the rear
firmly downwards.
The seat engages with an aud-
ible click.

Luggage loops

Removing the seat (
Turn the seat upside down.
Pull the loops 1 out of the
holders 2 and lay them on the
outside.
Installing the seat (
67).
68).