BMW K1300R Manual page 125

Engage spring retainer 4 in the
catches.
Close plug 3.
Fit the covers 1 for the high-
beam headlight or cover 2
for the low-beam headlight by
turning the covers clockwise.
Replacing parking-light
bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove securing screws 1
from both sides of the bulb
housing.
8
121
z