Table of Contents
Advertisement
2.4
E
V
XHAUST
ENT
®
This MACH
Outdoor Boiler is designed for outdoor use only.
®
See MACH
C750-C1050 Installation & Owner's Manual for additional venting requirements.
information contained herein should be used as a guide only and is not intended to be used in lieu of
qualified technical expertise. Failure to comply may result in injury or death.
Exhaust Vent System Installation
2.4.1
(Customer Supplied)
The exhaust vent should extend a minimum of 12 inches above the hood or at least two (2) feet above
the highest part of any independent structure within ten (10) feet of the vent.
Boiler clearance for combustibles / non-combustibles should be maintained per MACH
Installation & Owner's Manual.
Stainless Steel Exhaust System
2.4.2
Install manufactured exhaust vent systems in accordance with the manufacturer's listing and instructions.
Stainless Steel Adapter
2.4.3
An adapter is required to be installed between the boiler and the stainless venting. Below is a
table containing the available adapter for each MACH
listed below or equivalent.
®
MACH
Boiler Size
C-750,C-900,C-1050
Stainless Steel Adapter for Stainless Steel Vent
2.5
CPVC E
XHAUST
®
This MACH
Outdoor Boiler is designed for outdoor use only.
®
See MACH
C750-C1050 Installation & Owner's Manual for additional venting requirements.
Stainless Steel Adapter for CPVC
2.5.1
An adapter is required to be installed between the boiler and the CPVC venting. Below is a table
containing the available adapter for each MACH
below or equivalent.
I
NSTALLATION
The boiler vent should be installed per this manuals instruction. The
Nominal Stack
Stainless Adapter for Stainless Vent
Size
8"
V
S
ENT
YSTEM
MACH
®
boiler size. Installer should use Adapters
Supplier / Part Number
Heat-Fab / 9801MACH
®
boiler size. Installer should use Adapters listed
7
®
C750-C1050 Outdoor Boilers
®
C750-C1050
- Quick Links:
- Maintenance
- Assembly Drawing
Hide quick links:
Advertisement
Table of Contents
