Sony IPELA PCS-G50 Technical Documentation Manual page 12

Integration with Sony Network Camera
©2008 Sony Corporation
Operational Specifications 3: When the frame rate limit is exceeded
If the frame rate limit has been exceeded, it means that 4 or more terminals with
30fps are connected.
Condition
When connection is
3-a
made within the range
of the main PCS's
frame rate limit
When the frame rate
3-b
exceeds the main PCS's
frame rate limit
* : The PCS automatically switches communication modes not supported by the PCS (JPEG, dual codec, VGA, G.726,
1
30fps on H.264 and TCP) to a supported one.
VIDEO COMMUNICATION SYSTEM - TECHNICAL DOCUMENTATION
Operational Specifications
Determined Communication Mode
Authority
Administrator When each setting on the main PCS's
Authority network camera page is set to a setting other
than "Auto":
Connection is made using the PCS setting
values.
When each setting on the main PCS's
network camera page is set to "Auto":
In principle, operation follows each network
camera's setting
User Regardless of the main PCS's network camera
Authority settings, operation follows each network
camera's setting values.
Mixed Cameras connected with the administrator
Administrator authority and cameras connected with the
and User user authority operate independently of each
Authority other, with specifications described above.
Administrator When the frame rate exceeds the PCS's frame
Authority rate limit, it is automatically changed to the
optimum rate regardless of the main PCS's
network camera settings.
User When the frame rate exceeds the PCS's frame
Authority rate limit, the mode is changed to "Voice
Only" for all cameras that require capability
exchange again regardless of the main PCS's
network camera setup.
Mixed Cameras connected with the administrator
Administrator authority and cameras connected with the
and User user authority operate independently of each
Authority other, with the specifications described above.
1
values.*
February, 2008 / Ver 1.0
Connection
See
example
3-b
12