Sony IPELA PCS-G50 Technical Documentation Manual page 8

Integration with Sony Network Camera
©2008 Sony Corporation
Determined Communication Mode Based on Authority
("PCS" in the table below refers to the main terminal of the PCS-G50/G70.)
Camera Menu Setting
(on Network Camera)
Connection is made using the PCS setting value
H.264
regardless of the network camera
When the PCS setting is "Auto," however, the
network camera settings are prioritized.
MPEG4
Connection is made using the PCS setting value
JPEG
regardless of the network camera setting.
When the PCS setting is "Auto," however,
connection is made by automatically changing
the network camera setting to a mode
supported by the PCS (H.264 single
Dual Codec
Connection is made using G.711.
G.711
Connection is made by automatically changing
G.726
the network camera setting to the audio codec
supported by the PCS (G.711) regardless of the
network camera setting.
Connection is made using the PCS setting value
QQVGA
regardless of the network camera
When the PCS setting is "Auto," however, the
network camera setting is prioritized.
QVGA
Connection is made using the PCS setting value
VGA
regardless of the network camera setting.
When the PCS setting is "Auto," however,
connection is made by automatically changing
the network camera setting to an image size
supported by the PCS (QVGA).
Connection is made using the PCS setting value
Bit Rate
regardless of the network camera
When the PCS setting value is "Auto," however,
the network camera setting is
Frame Rate
Connection is made using the PCS setting value
Transmission Mode
regardless of the network camera setting.
(TCP/UDP)
* : When the network camera settings are changed for the connection, the previously set network camera settings are
1
automatically restored after communication has ended.
* : Videoconferencing connection is possible, even if G.726 is selected. Upon connection, a message is displayed
2
prompting the user to switch the audio codec.
To use audio for videoconferencing, switch to G.711 on the network camera.
* : Even if 30fps is selected, the rate is automatically set to 15fps (NTSC) or 12fps (PAL) if the mode is H.264 and the
3
transmission mode is TCP.
* : If the network camera setting is improper, a message is displayed prompting the user to make the proper setting.
4
VIDEO COMMUNICATION SYSTEM - TECHNICAL DOCUMENTATION
Authority Used for Connection
Administrator
1
setting.*
1
codec).*
1
*
1
setting.*
1
*
1
setting.*
3
prioritized.*
1
*
User
Connection is made using the network
camera setting (H.264 single codec).
Connection is made using the network
camera setting (MPEG4 single codec).
Connection is not possible if no action is
taken.
To make the connection, use the
network camera to switch the mode to
one that is supported by the PCS.
Connection is made using the network
camera setting (G.711).
Audio is not available between the
video communication terminal and
2
network camera.*
Connection is made using the network
camera setting (QQVGA).
Connection is made using the network
camera setting (QVGA).
Connection is not possible if no action is
taken.
To make the connection, use the
network camera to switch the image
size to one that is supported by the PCS.
Connection is made using the network
camera setting.
Connection is made using the PCS
setting. In addition, the network camera
4
setting is required.*
February, 2008 / Ver 1.0 8