Connecting The Cables - Roland GX-640/GX-500/GX-400/GX-300 Setup Manual

Connecting the Cables

WARNING
WARNING
WARNING
WARNING
WARNING
Power
connector
Power cord
Power outlet
Cable clamp
Push it into the
hole of the stand.
For more information about the cables used, see the following page.
Connect to an electrical outlet that complies with this machine's ratings
(for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Handle the power cord, plug, and electrical outlet correctly and with care.
Never use any article that is damaged.
Using a damaged article may result in fire or electrical shock.
When using an extension cord or power strip, use one that adequately
satisfies the machine's ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy
extension cord may cause fire.
Use only genuine power cord compatible with this machine.
Incompatible items may lead to an accident.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
Power rating
USB
Serial connector
connector
(RS-232C)
Included USB cable
DO NOT connect a USB
cable at this point
Serial cable (sold separately)
(RS-232C-compliant crossover
serial cable)
1-2 Installing
21