Set Up the Printer
This section provides information about setting up the printer to print cards.
Setup includes the following:
Prepare the Printer
•
Install Optional Equipment on page 10
•
Use the Card Printer Driver on page 13 or Use OpenCard Data Format on
•
page 13
Prepare the Printer
To prepare the printer to print cards, remove any packing material, load blank
card stock into the input hopper (optional), load print ribbon, and load a cleaning
sleeve onto the print cartridge.
Remove Packing Material from the Printer
Required only on printers with the optional multi‐card hopper.
1.
Unlock the printer and open the printer
supplies access door.
2.
Remove the packing material inserted
behind the multi‐card hopper.
3.
Close the printer supplies access door.
SD/CD Installation and Administrator's Guide
5