Digimerge DH200+ Series Instruction Manual page 156

Appendix M: Remote Viewing using Internet Explorer
Using Live Viewer
Remote viewing through Internet Explorer (images simulated)
To view full screen:
• Click the buttons at the top of the page or double-click a channel. Double-click the channel
again to return to split-screen.
To view split-screen:
• Click the 4, 9, or 16 buttons at the top of the page.
NOTE: The number of displayed channels depends on the number of channels available on your DVR.
DVR channels vary by model (8-channel model shown).
DVR Webserver
To configure your DVR system settings, PTZ settings etc. using Internet explorer, you can log in to
the system using the webserver command. To log in as a webserver user, enter /webserver at the
end of your DDNS address. For example, if your DDNS address is tomsmith.digimerge.net:80, you
would enter tomsmith.digimerge.net:80/webserver.
You will be prompted to install ActiveX components. Allow all installations to continue, and restart
Internet Explorer.
146