Isms Client (Remote Viewing On The Mac); System Requirements; Prerequisites; Installation Steps - Digimerge DH200+ Series Instruction Manual

iSMS Client (Remote Viewing on the Mac)

iSMS Client (Remote Viewing on the Mac)
The iSMS Client allows you to remotely connect and configure your DH200 Series DVR using the
Safari browser in Mac OSX 10.6.

System Requirements

Your system must meet or exceed the requirements below before installing the iSMS Client:
•
Operating System:
• Intel Core Duo series CPU or higher
CPU:
• 1024 GB
Memory (RAM):
•
Video Card memory:
•
Free Hard Drive space:
•
Video Resolution:

Prerequisites

• Download the iSMS client from www.digimerge.com, under the DH200 product page
• Port (or whichever port your system is using) must be port forwarded to your router
80
• You must create a DDNS account, and have the DDNS settings configured in your DVR
• The DVR must have internet access
• You must have a Digimerge DDNS address to log in remotely

Installation Steps

To install the iSMS Client:
1. Double-click on the iSMS Client icon.
2. Follow the on-screen instructions to install the software. Enter your password
when prompted to install the software.
Double-click to start
installation
82
Mac OSX 10.6 or later
256 MB
2GB
1024 x 768
Enter the admin password
when prompted